Big, chunky charms for a chain — each color prints as a separate flat piece, plus a matching chain link
Detail is how sharp the print is — more pixels means finer detail, like DPI on a photo. It does not set the physical size (you'll set that under Export as Print size). 500px is a good default; use 800–1000px for fine detail, or lower for a quick test.
For transparent PNGs, the alpha channel is used automatically — no tolerance needed. For solid backgrounds, flood-fills from all 4 corners. Raise tolerance if fringe remains around edges.
For enclosed gaps the outer Background Removal can't reach. Turn on the cut tool, then click a gap on the Original image (top panel) to punch it through as a real hole. Click a cut again to restore it. Results show in the Color Preview.
Detects the main colors in your image using k-means clustering. Each color becomes a separate flat STL piece. Click a swatch to adjust a detected color. Uncheck a color to exclude it from export.
Every hype chain gets a rounded tab that sticks out past the edge of the design — like a real keychain loop — with the mounting hole through its center. It's not a hole cut into the middle of the print.
🖱️ Use your mouse to position the ring — drag it directly in the Color Preview below, wherever you want it.
Builds a solid base plate in your base color, with the image sitting flush on top as a thin skin. Each top color exports as its own STL (Load them together in your slicer and assign filament colors per object.
⚠ This is your final size — import into your slicer and print at 100%. Resizing in the slicer will change the printed size.
💡 If your STL shows jagged or rough edges, the fix is usually a better source image — try a cleaner, higher-resolution version.
⛓️ Download Chain Link (3MF)